| 2.General Purpose Sleeves for single mode fiber |
|
| Descriptions |
A durable, one-piece
covering designed to protect single mode fibers joined
by fusion splicing |
Only one hole
guarantees no fiber misplacement Pre-shrinking fixes strength member
securely in place
without rose pataling |
For ez &
fast installation by one min |
Stainless steel
reinforcing pin |
Clear assembly
provides visual inspection of splice |
Adhesive lined
heat shrinkable inner tube |
Waterproof |
Guarantee for
the same life of the fusion splice |
| |
| Features |
3 layers |
Outer Tubing
: 2:1 ratio, irradiated polyolefin heat shrinkable tubing |
Inner Tubing
: EVA Resin Adhesive |
Strength member:
Stainless steel |
| |
| Technical Data Sheet |
|
|
Shrinking Temperature (¡É) |
90 ~120 |
| Radial
Shrinking Rate(%) |
>50
|
| Axial
Shrinking Rate(%) |
<3
|
| Low
Temperature Property |
No Crack
at -55¡É lasting 4 hours |
|
Normal Operation Temperature |
-40 ~
+65 |
|
Normal Operation Relative Humidity |
¡Â90%
|
|
Spark-over-Strength ( kV/mm) |
¡Ã20 |
|
Tensile Strength (Mpa) |
20 |
|
Loss at -40¡É |
0.01dB |
|
Loss at +60¡É, RH95% |
0.01dB
|
|
|